Understanding Computer Operations & Binary Instructions
A computer instruction is a binary code that specifies a sequence of micro-operations for the computer to perform.
Instructions are fundamental to how computers process information, dictating the specific operations the machine should execute. Each instruction tells the computer exactly what to do and how to do it.
All computer instructions are represented in binary format (0s and 1s) that the processor can understand and execute.
Each instruction triggers a sequence of micro-operations - the smallest executable operations within the processor.
The control unit interprets instruction codes and generates appropriate control signals to execute operations.
The opcode is a group of bits that defines the specific operation to be performed. Common operations include add, subtract, shift, and complement.
Instructions must specify where operands (data) are located and where results should be stored. This involves processor registers or memory addresses.
Enter a 12-bit address (0-4095) to see its binary representation:
I bit (bit 15): Addressing mode (0 = Direct, 1 = Indirect)
Opcode: 000 through 110 for memory operations
Address: 12-bit address (0-4095)
Enter a 16-bit binary instruction to identify its format:
Performs logical AND between memory word and Accumulator (AC)
Adds memory word to AC with carry to E flip-flop
Loads memory word into the Accumulator
Stores AC content into memory location
Transfers program control to new address
Branches to subroutine and saves return address
Sets Accumulator to zero
Sets E flip-flop to zero
Complements all bits in AC
Increments AC by one
Inputs character from terminal into AC
Outputs character from AC to printer
Skips next instruction if input flag is on
Turns interrupt facility on
Select an instruction and see how it executes step by step:
Convert instruction codes between binary and hexadecimal:
All instructions are binary codes that specify micro-operations
Memory-reference, Register-reference, and I/O instructions
Direct (I=0) and Indirect (I=1) addressing modes